Dragino LoRaWAN Asset Tracker – TrackerD-LS
US 915 MHz band • Built-in Open Source LoRaWAN tracker • Solar Panel + 3000mAh Li-on rechargeable battery
Features
- LoRaWAN 1.0.3 Class A
- ESP32 PICO D4
- SX1276/78 Wireless Chip
- Arduino IDE Compatible
- Open-source hardware/software
- Regular/ Real-time GPS tracking
- Built-in 3 axis accelerometer.
- Motion sensing capability
- Power Monitoring
- Charging circuit via USB port
- 3000mA Rechargeable Li-on Battery + Solar Panel
- Datalog
- Logistics and Supply Chain Management
- Asset Tracking
Specifications
- MicroController:
- Espressif ESP32 PICO D4
- MCU: ESP32 PICO D4
- Integrated SPI flash: 4 MB
- RAM: 448 KB
- EEPROM: 520 KB
- Clock Speed: 32Mhz
- Common DC Characteristics:
- Supply Voltage: 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 60°C
- LoRa Spec:
- Frequency Range: 168 dB maximum link budget.+20 dBm – 100 mW constant RF output vs.Band 1 (HF): 862 ~ 1020 Mhz
- Band 1 (HF): 862 ~ 1020 Mhz
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM, and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
- Automatic RF Sense and CAD with ultra-fast AFC.
- Packet engine up to 256 bytes with CRC.
- LoRaWAN 1.0.3 Specification
- Band 1 (HF): 862 ~ 1020 Mhz
- Battery:
- 3000mA Li-on Battery power
- Built-in Solar Panel
- Power Consumption:
- Sleeping Mode: 60uA
- LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
- Tracking: max: 38mA
Images
[Image]
[Image]
[Image]
[Image]
[Image]
[Image]
[Image]
[Image]
Details
TrackerD-LS is an open-source LoRaWAN Asset Tracker based on ESP32 MCU and Semtech LoRa Wireless...